SR Archives - ÀÖ²¥´«Ã½ The World's Leading High Performance Brake Specialists Fri, 26 Jun 2026 11:59:02 +0000 en-US hourly 1 https://wordpress.org/?v=7.1.4 /wp-content/uploads/2021/04/cropped-favicon-32x32.jpg SR Archives - ÀÖ²¥´«Ã½ 32 32 ÀÖ²¥´«Ã½ Expands Sintered Pad Operations at its Ohio Plant /corporate-news/ebc-brakes-expands-sintered-pad-operations-at-its-ohio-plant/ Fri, 26 Jun 2026 09:38:23 +0000 /?p=42430 The post ÀÖ²¥´«Ã½ Expands Sintered Pad Operations at its Ohio Plant appeared first on ÀÖ²¥´«Ã½.

]]>

ÀÖ²¥´«Ã½ Expands Sintered Pad Operations at its Ohio Plant

The unique nature of ÀÖ²¥´«Ã½â€™s sintered brake pad range for high-end cars and motorsport applications sets ÀÖ²¥´«Ã½ products apart.

Made from a blend of carbon granules, ceramics, and sintered copper, the ÀÖ²¥´«Ã½ line-up includes two grades: SR-11, with a friction coefficient above 0.55 – well beyond what semi-metallic compounds can deliver – and SR-21, offering even more grip with a friction coefficient of 0.65.

Both materials run safely up to temperatures well above 1700 °F (925°C) and have been successfully used in closed-circuit and undrance racing, including by ChampCar teams such as Eddie Vetter Racing and numerous drivers competing in GT Racing. Their combination of high friction levels, temperature stability, and proven durability continues to make them a popular choice among drivers seeking race-proven braking performance.

The Sintered SR pad range covers most popular aftermarket calipers, and a whole host of stock/OEM calipers, and details can be found here:

ÀÖ²¥´«Ã½ Racing SR-Series Range

ÀÖ²¥´«Ã½ are now tooling for August release of SR-Series sintered pads for the stock BMW M4 calipers, as shown below:

  • BMW G8X Platform: DP82454.20SR11 / DP82454.20SR21 (Front axle)
  • BMW F8X Platform: DP82130.17SR11 / DP82130.17SR21 (Front axle)
  • BMW F8X Platform (Competition/2NH): DP82148.20SR11 / DP82148.20SR21 (Front axle)
  • BMW F9X Platform: DP82331.20SR11 / DP82331.20SR21 (Front axle)

More numbers will be added this fall.

Read more here: /products/ebc-sintered-sr-series/

The post ÀÖ²¥´«Ã½ Expands Sintered Pad Operations at its Ohio Plant appeared first on ÀÖ²¥´«Ã½.

]]>
Thrills and Spills at Portimão for SR-21â„¢-Equipped BMW Race Team /race-motorsport-articles-cars/thrills-and-spills-at-portimao-for-sr-21-equipped-bmw-race-team/ Tue, 16 Jun 2026 14:31:17 +0000 /?p=42371 The post Thrills and Spills at Portimão for SR-21â„¢-Equipped BMW Race Team appeared first on ÀÖ²¥´«Ã½.

]]>

Autoworks Motorsport is competing in the Iberian Supercars Endurance Series

The ÀÖ²¥´«Ã½ Frenos (Spain)-supported Autoworks Motorsport race team has achieved much success in recent years, piloting ÀÖ²¥´«Ã½-equipped race cars in the Iberian Supercars Endurance Series.

Since the second half of 2025, the outfit has been elevated to the GT4 Bronze class thanks to the acquisition of a G82 BMW M4 GT4 – complete in the long-standing ÀÖ²¥´«Ã½ Racing livery.

This car has been sporting ÀÖ²¥´«Ã½ Racing’s SR-21â„¢ sintered endurance race pads, giving the team the edge when it comes to stopping power.

We most recently caught up with Autoworks Motorsport off the back of their debutant race for 2026 at the famous Portimão Circuit, where great promise was shown across the weekend despite many setbacks.

Read how it all panned out in their own words below…

“Autoworks Motorsport closes the first round of the Iberian Supercars at the Algarve International Circuit with a bittersweet taste. The weekend demonstrated the excellent technical level of the Madrid structure and the incredibly fast race pace of its driver duo, but the final results were overshadowed by the harshness on track.

“The weekend began with very positive feelings in the qualifying sessions, where the tremendous equality and great form of the drivers from the Madrid structure were evident.”

“Héctor Hernández and Borja Hormigos drove to the limit, stopping the clock with a minimal difference of just one tenth of a second in favour of Héctor. This consistency in times demonstrated the rapid adaptation of both to the latest evolution of the BMW M4 GT4 (G82) and gave the team excellent starting positions for the official races. In the first race of the weekend, the team started from fourth position in the GT4 Bronze category, while in the second race they managed to secure a stellar second position.

“However, luck did not accompany them in both races when they were running in podium positions. In the first race, a heavy hit delivered by the same rival relegated the team to fifth final position, a result that did not do justice to the real pace on track. The story repeated itself almost identically in the second leg. A new impact by the same opponent left the vehicle severely damaged, forcing a retirement and depriving the car of crossing the finish line.”

“Despite the double material blow, the balance of the structure is positive professionally. The pure performance of the car, the race pace, and the flawless work of the young technical specialists and technological partners (ÀÖ²¥´«Ã½ racing and ELF Lubricants) proved that the project has plenty of speed to fight for the GT4 Bronze championship.”

“Qualifying showed that Borja and I are running the same times and that the car is fast,” says Héctor Hernández. “The race pace was spectacular and that is the positive takeaway. We know we have the speed and that the team worked at two hundred percent, but it is a shame that external factors leave us without the points we deserved.”

“It makes us very angry to finish like this because starting second in race two, the podium was within our reach,” declares Borja Hormigos. “In the second leg, the hit forced us to retire. Now it is time to change the mindset immediately; we had to experience the bitter side of racing and now we have to pull together to leave the car perfect.”

“The logistics team is already on its way back to the Autoworks Motorsport facilities. The technical staff will focus all their efforts starting today on evaluating the structural damage and proceeding with the urgent repair of the BMW M4 GT4, with the aim of arriving in full condition for the most important event of the year in front of their fans.

“The second round of the Supercars Endurance season will be held at the Circuito de Madrid Jarama-RACE. The event will score points solely for the Spanish Supercars Championship and promises to bring together a high-level grid once again on a circuit with a unique history in Iberian motorsport.”

Connect with Autoworks Motorsport for more news and information:

SRâ„¢ Sintered Endurance Race Pads

A world-first true endurance pad, delivering better braking and lasting longer than just about any of its rivals. Available in SR-11â„¢ and SR-21â„¢ blends.

View Product

The post Thrills and Spills at Portimão for SR-21â„¢-Equipped BMW Race Team appeared first on ÀÖ²¥´«Ã½.

]]>
ÀÖ²¥´«Ã½-Equipped Civic Race Team Excel in Final Rounds /race-motorsport-articles-cars/ebc-equipped-civic-race-team-excel-in-final-rounds/ Thu, 22 Jan 2026 15:54:09 +0000 /?p=41671 The post ÀÖ²¥´«Ã½-Equipped Civic Race Team Excel in Final Rounds appeared first on ÀÖ²¥´«Ã½.

]]>

Semprini Racing is using ÀÖ²¥´«Ã½ Racing’s SR-11â„¢ pads in a number of race series around the UK

Jeremy Evans and Phil Hart are the drivers of the Tunbridge Wells-based Semprini Racing outfit – a team that is currently campaigning a K24-engined EP3 Honda Civic Type R across both the MSV Trackday Trophy and BRSCC Supersport Endurance Championship race series in the UK (also performing occasional rounds in the MSVT Trackday Championship and the BRSCC Clubsport Trophy).

The duo relies on ÀÖ²¥´«Ã½ Racing’s SR-11â„¢ pads (front axle) and ÀÖ²¥´«Ã½â€™ Bluestuff B pads (rear axle).

We catch up with the team as they enter their final rounds of 2025 – which proved to be a great success.

Read how it all panned out in their own words below…

“We managed to get the Civic back together after the crash and made the last two races of the year! 

“After a mid-season crash at a wet Donington Park, the Semprini Racing Civic underwent an unscheduled rebuild! 

“Joining up with the Club Racing UK team for the famous Birkett Relay, the ÀÖ²¥´«Ã½ SR-11â„¢/Bluestuff-equipped Civic made its return to action on the Silverstone Grand Prix circuit. 

“Pressed into action for two stints rather than the planned one due to an issue with another car in the team, Jeremy quickly got himself and the car back up to speed and posted a best lap time two seconds quicker than when they had raced at the circuit earlier in the season.”

“The final race of the season was in the Trackday Trophy at Brands Hatch and was a unique experience as qualifying had to take place behind the safety car because of fog. This meant grid positions were drawn out of a cup with Jeremy drawing P30 out of the 34 cars! 

“Come race time and the fog had lifted but the rain had started. A very busy start at the Brands Hatch Indy circuit from P30 saw Jeremy stay out of trouble and then set about some overtaking… and some more overtaking!

“In tricky wet conditions, Jeremy relied on the excellent feel from the ÀÖ²¥´«Ã½ setup and made up an incredible 25 places to finish 5th overall and 4th in class at the flag. In fact, Jeremy made up more places than any other driver!

“On to 2026 now and plans are already taking shape for another season with the Civic.”

Connect with Semprini Racing for more news and information:

SR-11â„¢ Race and Endurance Pads

A medium-friction endurance motorsport compound that’s targeted for front of street base cars where high ABS effect exists on the car or for the front and rear of race cars with bias controls.

Bluestuff NDX Street/Motorsport Pads

Reformulated for faster bedding and reduced early life fade –our recommended entry-level race pad. Medium-plus lifetime and the choice for several seasons in BMW Cup racing.

The post ÀÖ²¥´«Ã½-Equipped Civic Race Team Excel in Final Rounds appeared first on ÀÖ²¥´«Ã½.

]]>
ÀÖ²¥´«Ã½-Equipped Semprini Racing – Mid-Season Round-Up /race-motorsport-articles-cars/ebc-equipped-semprini-racing-mid-season-round-up/ Tue, 23 Sep 2025 13:39:34 +0000 /?p=41246 The post ÀÖ²¥´«Ã½-Equipped Semprini Racing – Mid-Season Round-Up appeared first on ÀÖ²¥´«Ã½.

]]>

The team is using ÀÖ²¥´«Ã½ Racing’s new endurance pad in a number of race series around the UK

Jeremy Evans and Phil Hart are the drivers of the Tunbridge Wells-based Semprini Racing outfit – a team that is currently campaigning a K24-engined EP3 Honda Civic Type R across both the MSV Trackday Trophy and BRSCC Supersport Endurance Championship race series in the UK (also performing occasional rounds in the MSVT Trackday Championship and the BRSCC Clubsport Trophy).

The duo rely on ÀÖ²¥´«Ã½ Racing’s SR-11â„¢ pads (front axle) and ÀÖ²¥´«Ã½â€™ Bluestuff B pads (rear axle).

We catch up with the outfit mid-way through the 2025 season, where they’ve already encountered plenty of thrills and spills along the way, as you can read in their own words below…

“A mixed first half of the season!

“Semprini Racing’s ÀÖ²¥´«Ã½-equipped Honda Civic has had a busy and mixed start to the season. Electrical gremlins in pre-season testing meant the first round of the BRSCC Supersport Endurance Cup was missed, with the season starting instead with the MSV Trackday Trophy at Silverstone.

“This season, the Civic is once again with the tried-and-tested combination of ÀÖ²¥´«Ã½ SR-11â„¢ front pads and Bluestuff rear, giving that great combination of stopping power and pedal feel.

“Solid mid-class pace at Silverstone, but importantly, reliability from the first race with a new engine wiring loom gave the team a huge relief.

“Next up was the delayed return to the Supersport grid at Oulton Park, a great track and firm favourite of both Jeremy and Phil. Tricky, changeable wet/dry conditions saw the pair again solidly mid-class without taking undue risks. The feel from the SR-11™/Bluestuff combo meant braking in the changeable conditions was predictable and the drivers could concentrate on finding grip on the damp track. Despite a last lap clutch failure, the Civic was classified as a finisher and we breathed a sigh of relief, only to have the recovery truck pull the front of the car off and damage the oil cooler, meaning a bigger repair job than hoped for!

“With clutch and oil cooler replaced and the car put back together, it was off to Snetterton – a circuit the Civic has performed well at historically. Qualifying was tricky with both drivers unhappy with the feel from the car and unable to match times from previous visits. We started the race a bit further back than hoped for and after 20 minutes alternator failure ended our race early. We subsequently found a leaky shock absorber to explain the poor handling. Surely our luck had to change soon!

“Onwards to Brands Hatch and back to the Trackday Trophy on the iconic Grand Prix circuit. Jeremy is driving these races solo this year as Phil shares another Civic with his sons in this series. Putting in competitive lap times in an extremely close top Class B, Jeremy improved on his previous visits to the Brands Hatch Grand Prix circuit and was comfortable in the car, now complete with new shock absorber and alternator plus some other setup changes. A fresh set of each of the SR-11™ and Bluestuff pads completed the car prep.

“A poor start by Jeremy saw him drop a couple of places and settle in to a battle in the middle of the class B pack. A safety car just as the pit window opened where Jeremy decided to stay out and gain a lap over those ahead who pitted backfired when the Safety Car picked up Jeremy as the leader and slowed him right down. Pitting next time around, the circuit went green as the Civic was stationary, compounding the loss in time!

“Now in 18th, Jeremy set about overtaking anything in his path, leaning on the ÀÖ²¥´«Ã½ brakes as never before to overtake a total of 10 cars – including three in once corner – and finish in 8th overall, 7th in class, with a new personal best lap time. The car felt great and performed well – the driver could do better!â€�

“Back to the BRSCC and Donington Park, where Phil re-joined Jeremy for a double-header Clubsport 45-minute race we used as a test for the main event, the 2-hour SuperSport race on Sunday.

“Another solid mid-class outing in wet conditions on Saturday set us up well for Sunday… or so we thought! Going out first in qualifying on Sunday, Jeremy set out for an early push lap while the track was quiet, unaware a helpful Mini had dropped coolant at the top of the circuit at the fast right hander at Coppice. Full of confidence, Jeremy turned into the corner fully committed to have the car go straight on and into the gravel trap, beached! The lovely marshalls hooked us up to a telehandler and dragged the Civic out so Jeremy could put in another lap to get the requisite three before handing over to Phil. As we’d received ‘mechanical assistance’ to get out of the gravel trap, none of our subsequent lap times counted, so we were plum last on the grid!

“Not to be deterred, Phil took the start and had overtaken five cars before the first corner as he set off to make up places. During his hour-long stint, Phill got us up to an incredible 2nd in class by the time of the change-over. Keeping it consistent and battling fading tyres and diminishing fuel, Jeremy had a good battle for position with the fast Mazda MX-5 in our class and brought the Civic home in 2nd for our first podium and trophy of the season! Finally a good result where car and drivers had combined well,

“Our travels took us to Croft circuit next – the first time Jeremy had been to the new layout, having last raced there on the rallycross circuit over 20 years ago! A fresh pair of SR-11â„¢ front pads and it was into a free practice session to iron out any issues and do a bit of set up work followed by a good qualifying in P2 in class behind the all-conquering Audi TT that is dominating this class, but in front of the MX-5 we are battling with.

“Jeremy took the start and actually overtook the Audi into turn 1, but was soon back down to 2nd as the rocket ship Audi took off and joined the battle with the cars in the classes above. Keeping an eye on the Mazda’s pit board, Jeremy could see the gap increasing as he pulled away and settled into a nice rhythm. The Civic then threw its latest curveball by losing 3rd gear as Jeremy came out of the complex towards the final hairpin after 20 minutes. Despite this – and a couple of excursions – he managed to maintain 2nd in class and hand over to Phil with a very useful buffer. Phil duly maintained and then extended the gap before a late safety car which – this time – played into our hands and increased the gap to the Mazda. We crossed the line for another P2 and another trophy, plus a front left tyre down to the cords!”

“Back to Donington and back with MSV for the double header weekend of Trackday Trophy and Trackday Championship. For the first time this season, Jeremy was entered in the TDC and duly strapped on a set of the control Toyo R888R tyres for the wet/very wet qualifying session. Driving on these tyres in the wet for the first time, the Civic Jeremy kept his head and didn’t push things too hard, to come in mid-grid. 

“The race started even wetter and after a reasonable start, Jeremy was battling in a group of cars when one – another MX-5 – spun in front and into the path of an evasive-action taking Jeremy who had nowhere to go, slamming into the spinning Mazda and sustaining considerable damage to the front left of the car. 

“It’ll take some time to repair the Civic, but the aim is to be back out this season, at the very least for the season-ending Birkett Relay, but hopefully for a couple more events before that.

“Big thanks to ÀÖ²¥´«Ã½ for the support again this season – we may not get through as many sets of pads as we’d have liked to due to our enforced absence for a while, but the SR-11â„¢//Bluestuff combo has been one thing we haven’t had to worry about in this challenging season!â€�

Connect with Semprini Racing for more news and information:

SR-11â„¢ Race and Endurance Pads

A medium-friction endurance motorsport compound that’s targeted for front of street base cars where high ABS effect exists on the car or for the front and rear of race cars with bias controls.

Bluestuff NDX Street/Motorsport Pads

Reformulated for faster bedding and reduced early life fade –our recommended entry-level race pad. Medium-plus lifetime and the choice for several seasons in BMW Cup racing.

The post ÀÖ²¥´«Ã½-Equipped Semprini Racing – Mid-Season Round-Up appeared first on ÀÖ²¥´«Ã½.

]]>
ÀÖ²¥´«Ã½-Supported Iberian Supercars Endurance Team Secures New BMW GT4 Race Car /race-motorsport-articles-cars/ebc-supported-iberian-supercars-endurance-team-secures-new-bmw-gt4-race-car/ Tue, 16 Sep 2025 13:43:14 +0000 /?p=41183 The post ÀÖ²¥´«Ã½-Supported Iberian Supercars Endurance Team Secures New BMW GT4 Race Car appeared first on ÀÖ²¥´«Ã½.

]]>

Autoworks Motorsport uses SR-21â„¢ sintered brake pads on their new BMW M4 GT4

The ÀÖ²¥´«Ã½ Frenos (Spain)-supported Autoworks Motorsport race team has achieved much success in recent years, piloting ÀÖ²¥´«Ã½-equipped race cars in the Iberian Supercars Endurance Series.

Most recently competing in the GTC class, the team are proud to unveil that they are now back in the GT4 Bronze category, thanks to the acquisition of a stunning G82 BMW M4 GT4 – complete in the team’s long-standing ÀÖ²¥´«Ã½ Racing livery.

As always, the new BMW will proudly sport ÀÖ²¥´«Ã½ Racing’s SR-21â„¢ sintered endurance race pads, giving the team the edge when it comes to stopping power.

You can read about this new purchase, and the Autoworks Motorsport’s future plans with the car, in their own words below…

“After starting the season in the GTC category, Héctor Hernández and Borja Hormigos are switching to the BMW M4 GT4 (G82), returning to the GT4 Bronze category with the support of the Autoworks Motorsport team and sponsorship from ÀÖ²¥´«Ã½ Spain. 

“After finishing last season, team’s goal was to change car so that they could continue competing in GT4 Bronze, the category in which they achieved third place in the three championships that make up the Iberian Supercars Endurance. Initially, this was not possible, and the team participated in the first two rounds of the championship in the GTC category, but after the Jarama race, an unexpected change of direction allowed them to switch to a more modern and advanced vehicle, which also allowed them to return to the GT4 Bronze category.”

“The BMW M4 GT4 (G82) is the latest version of the competition model from BMW Motorsport and, compared to its predecessor, with which Hernández-Hormigos have competed for the last two seasons, incorporates major advances in electronics, traction control management, and ABS.�

“Taking this step has been a huge effort for the team, but we are very excited about the new car. With the livery, we wanted to pay tribute to our F82, the results of 2024, and our first year in GT4 Bronze. We now have a lot of work to do on the track and in the pits, but we will take advantage of the remaining races this season to prepare for 2026, where we hope to fight for the category,” commented Héctor and Borja.

“Ahead of the first race in Valencia this weekend, the action on the track will begin with free practice sessions scheduled for Saturday starting at 9:00 a.m. In the afternoon, the two qualifying sessions that will determine the starting grid are scheduled for 3:30 p.m. (Q1) and 3:50 p.m. (Q2). Finally, the main event will take place on Sunday with two races. The first will start at 11:05 a.m., while the second will start at 4:05 p.m. All the action of the Iberian Supercars can be followed live on DAZN Spain and via streaming on the Supercars Endurance YouTube channel.�

Connect with Autoworks Motorsport for more news and information:

SRâ„¢ Sintered Endurance Race Pads

A world-first true endurance pad, delivering better braking and lasting longer than just about any of its rivals. Available in SR-11â„¢ and SR-21â„¢ blends.

View Product

The post ÀÖ²¥´«Ã½-Supported Iberian Supercars Endurance Team Secures New BMW GT4 Race Car appeared first on ÀÖ²¥´«Ã½.

]]>
ÀÖ²¥´«Ã½-Equipped Semprini Race Team – 2024 Seaon Round-Up /race-motorsport-articles-cars/ebc-equipped-semprini-race-team-2024-seaon-round-up/ Thu, 12 Dec 2024 13:46:14 +0000 /?p=40018 The post ÀÖ²¥´«Ã½-Equipped Semprini Race Team – 2024 Seaon Round-Up appeared first on ÀÖ²¥´«Ã½.

]]>

The team is using ÀÖ²¥´«Ã½ Racing’s new endurance pad in a number of race series around the UK

Jeremy Evans and Phil Hart are the drivers of the Tunbridge Wells-based Semprini Racing outfit – a team that is currently campaigning a K24-engined EP3 Honda Civic Type R across both the MSV Trackday Trophy and BRSCC Supersport Endurance Championship race series in the UK (also performing occasional rounds in the MSVT Trackday Championship and the BRSCC Clubsport Trophy).

The duo rely on ÀÖ²¥´«Ã½ Racing’s SR-11â„¢ pads (front axle) and ÀÖ²¥´«Ã½â€™ Bluestuff B pads (rear axle).

It’s been another action-packed year for the team, as the team explains below in their 2024 season review…

“We took part in two main series this season – the BRSCC Supersport Endurance Championship in class ‘Clubman-A’, and the MSV Trackday Trophy in class B. We also had outings in the MSV Trackday Championship at Cadwell, which was abandoned to fog and Navarra in Spain where we podiumed (3rd in class), as well as a single round of the BRSCC Clubsport Trophy at Donington where we came 4th in class.�

BRSCC SuperSport Endurance Championship

  • Rounds participated in: 5
  • The first round of the season at Silverstone saw us qualify 5th in class, but feeling there was a lot more speed to come as we got to grips with the unfamiliar Silverstone International circuit. Unfortunately, the Civic had other ideas and cut out on the green flag lap to the grid and was classified as a DNF.
  • The next round was at Snetterton, a circuit we have gone well at in the past. Sure enough, both Phil and Jeremy set their fastest ever laps around the 300 layout, despite having to take some unusual lines around Coram and at the end of the Bentley Straight to avoid oil spillages. Finishing 2nd in class, just 40 seconds behind the class winner was a great result and kick started our class challenge. The big braking zones into the Wilson hairpin, the Brundle/Nelson chicane and the final Murrays tight left-hander are real tests for the car and where strong braking but a good pedal feel to avoid locking up is essential. Our ÀÖ²¥´«Ã½ Racing SR-11â„¢ (front) and Bluestuff (rear) brake pad combo are perfect for this and help us keep our tyres intact through a long two-hour endurance race. Jeremy set his fastest lap in the last 10 minutes of the race, proving the benefit of a great braking setup.
  • At Croft Phil drove solo for the full two hours and had his work cut out, having never been to Croft before, and facing rainy conditions. The SR-11â„¢ front pads proved their worth here, giving excellent feel in the conditions allowing Phil to find his rhythm and bring the Civic home P3 in class.
  • On to the Donington GP track for the next round where some suspiciously quick cars joined the class in the form of a TCR-esque Golf and a Lotus who were lapping a full 5-6 seconds a lap quicker than the Civic. Qualifying 4th in class, Phil and Jeremy were able to improve in the race to come home with another class podium in P3. This despite the loss of 3rd gear mid-way through the race! This meant leaning even harder on the ÀÖ²¥´«Ã½ brake pads without the help of third gear to slow us down into the Fogarty Esses or the Melbourne Hairpin.
  • Our final round of this championship was at the Brands Hatch Indy circuit – a very busy place to be with 28 cars of varying lap times! Managing only 6th in a very congested qualifying session, Jeremy and Phil set about the race in hot temperatures aiming for consistency and reliability, something some other cars struggled with. It was enough to improve to P4 at the end and put us into P2 in class for the championship.
  • We were unable to run the car in the season finale at the Silverstone National circuit due to our imminent departure to Spain for another series, so Phil and son James debuted their Civic in the guest class. Had they run in class they would have finished P3 but the points didn’t count towards our championship. Luckily some of our regular competitors also didn’t make this round so we finished the season in P2 in class, a result the team is delighted with.

MSV Trackday Trophy

  • Round 1 was at Donington Park and it was an ÀÖ²¥´«Ã½ Civic lockout with the Semprini EP3 coming in 2nd behind the similar ÀÖ²¥´«Ã½ Civic of Justin Roberts and Nicole Draught. Jeremy and Nicole had a great battle in the early stages of the race before different strategies came into play around the safety cars. At the end it was the Roberts/Drought Civic 1st over the line with the Semprini Civic in 2nd.
  • The Brands Hatch Grand Prix circuit was the venue for the next round, with Jeremy and Phil qualifying in P7 on a mega-competitive grid, just 1.1 seconds covering P1-P7. In the race the Civic was strangely off the pace resulting in a P6 finish, later attributed to the hot temperatures causing the engine management system to go into a more cautious mode. Post-race we made some changes to the air intake system and the problems didn’t return for the rest of the season.
  • The next round at Lydden Hill was eventful with torrential rain giving way to sunshine. Qualifying in P2, once again behind the Roberts/Drought ÀÖ²¥´«Ã½ Civic, It was Jeremy who set off after the fast starting Justin for the first stint. Trading lap times the gap remained tantalisingly close before the mid-race driver changes. It was apparent straight away when Phil started his stint that the abrasive Lydden surface had taken its toll and the front right tyre burst, leaving Phil to limp back to the pits. A hasty tyre change got the Civic back out on track before the end of the race to claim 2nd in class.
  • On to Snetterton where an unfortunate misunderstanding with a backmarker resulted in an accident for Phil and a DNF for the Civic.
  • The season moved on to our first overseas event at the superb Navarra Circuit in Northern Spain where we took part in both the TDT and TDC races. The Navarra track is another where a great braking balance is essential with a big braking zone following the flat out turn 1 into turns 2 and the very tight turn 3. Then at the end of the back straight is another big braking zone and into the new hairpin installed just before we arrived – we were the first series to take part on the new circuit layout. The final corner is also a tight one, coming off a fast left hander into a tight, slow right turn onto the main straight. Our SR-11â„¢/Bluestuff combo was superb again at getting the car slowed down and into the corners with great feel, avoiding lock ups and keeping the tyres on song.
  • In the TDC, race we placed 3rd in class resulting in a podium appearance being presented with our trophy and bottle of local Rioja by circuit owner and ex-Formula 1 driver Jonathan Palmer.
  • The TDT race was less successful as a power steering pipe popped off at the end of lap 2, dowsing the hot engine with fluid and resulting in a DNF.
  • The final race of the year was back at Brands Hatch on the Indy circuit and was something a little different for us as we ran both the blue Civic and Phil and James in their White Civic. Uniquely Phil was to drive both cars in the race so our pitstops were dictated by this rather than a more normal strategy! Sure enough, an early safety car was too soon for us so we stayed out, at one point having a 1-2 in the race before making our stops for Phil to hop out of the Blue Civic and hand over to Jeremy while awaiting James to stop in the white car so he could jump in. Although out of position, Jeremy had a very entertaining battle with class C champion Waynes Cockerill’s Toyota Celica with a pass into Druids made possible by leaning very heavily on the ÀÖ²¥´«Ã½ combo to take a gap that looks to be closing, avoiding a lock up and passing successfully. A very entertaining race but with no trophies this time!

“Plans for 2025 are underway – we are coming back to the BRSCC Supersport Championship to see if we can go one better and win our class next year…”

Connect with Semprini Racing for more news and information:

SR-11â„¢ Race and Endurance Pads

A medium-friction endurance motorsport compound that’s targeted for front of street base cars where high ABS effect exists on the car or for the front and rear of race cars with bias controls.

Bluestuff NDX Street/Motorsport Pads

Reformulated for faster bedding and reduced early life fade –our recommended entry-level race pad. Medium-plus lifetime and the choice for several seasons in BMW Cup racing.

The post ÀÖ²¥´«Ã½-Equipped Semprini Race Team – 2024 Seaon Round-Up appeared first on ÀÖ²¥´«Ã½.

]]>
SRâ„¢-Equipped GT4 Racers Continue Stint of Success /race-motorsport-articles-cars/sr-equipped-gt4-racers-continue-stint-of-success/ Wed, 28 Aug 2024 15:38:34 +0000 /?p=39401 The post SRâ„¢-Equipped GT4 Racers Continue Stint of Success appeared first on ÀÖ²¥´«Ã½.

]]>

The ÀÖ²¥´«Ã½-backed Autoworks Motorsport team uses SR-21 sintered brake pads on their BMW M4 GT4

In 2023, the ÀÖ²¥´«Ã½ Frenos (Spain)-supported Autoworks Motorsport race team clinched gold in the TC class of both the Iberian Supercars Endurance Series and Portuguese Speed Championships, following a thrilling year of racing. Throughout this season, their BMW M240i race car was equipped with ÀÖ²¥´«Ã½ Racing’s RP-Xâ„¢ track motorsport brake pads.

For 2024, the outfit has upgraded to a BMW M4 GT4 race car, to put them in the GT4 category of the Supercars Endurance Series. In this car, they are running ÀÖ²¥´«Ã½ Racing’s new SR-21â„¢ sintered endurance race pads, to help handle the extra capabilities of their new car.

Following two rounds in Spain, where the team propelled themselves to the sharp end of the standings, the most recent round at Portugal’s Fernanda Pires da Silva race track saw the duo hit the podium once again, despite some hurdles to deal with across the weekend.

Read how it all panned out in the team’s words below…

“The Autoworks Motorsport team went from strength to strength at the Portuguese event, achieving a podium finish in the second race in the GT4 Bronze category of the Iberian Supercars Endurance, which took place this weekend at the Fernanda Pires da Silva race track in Estoril.

“The Iberian Supercars Endurance 2024 continued its season in Portugal, after the first two rounds in Spain, at the Autódromo Fernanda Pires da Silva de Estoril, a track that Héctor and Borja know from last year, although not the variant with the chicane, which was the official one during the competitions of this third round. These two slow corners played havoc with the traction of their BMW M4 GT4 and therefore hurt their lap times.

“Friday was entirely dedicated to free practice, while Saturday was all about official practice, with both Borja and Héctor failing to get their BMW M4 GT4 to the front of the grid, so they would have to come back in the race if they were to continue their run of podium finishes from Jerez and Jarama.”

“In the first race on Sunday, Borja started from sixth position and although he made a good start, a mistake put him back to his initial position, and after the pit stop it was impossible for Hector to get close to his rivals due to tyre degradation, but he kept the sixth position, and with it some valuable points for the championship.

“The second race was notable for a good start and first stint by Héctor, who left the car well positioned so that, after the pit stop, Borja took advantage to attack with everything he had and finish third in his category at the finish line.

“’We are very satisfied! Despite the fact that we were barely able to run in free practice due to several incidents on track, the team’s progress went from strength to strength throughout the weekend. On such a difficult track for our car and in front of many high-level rivals racing at home, achieving a third place in the GT4 Bronze category leaves us with a very good taste in our mouths’, commented Héctor and Borja.

“The fourth round of the Iberian Supercars Endurance returns to Spain after the summer period on 28-29 September at Ricardo Tormo race track in Valencia.�

Connect with Autoworks Motorsport for more news and information:

SRâ„¢ Sintered Endurance Race Pads

A world-first true endurance pad, delivering better braking and lasting longer than just about any of its rivals. Available in SR-11â„¢ and SR-21â„¢ blends.

View Product

The post SRâ„¢-Equipped GT4 Racers Continue Stint of Success appeared first on ÀÖ²¥´«Ã½.

]]>
SRâ„¢-Equipped Supercars Endurance Series Team Secure More Podiums as 2024 Campaign Begins /race-motorsport-articles-cars/sr-equipped-supercars-endurance-series-team-secure-more-podiums-as-2024-campaign-begins/ Fri, 05 Jul 2024 10:37:06 +0000 /?p=39172 The post SRâ„¢-Equipped Supercars Endurance Series Team Secure More Podiums as 2024 Campaign Begins appeared first on ÀÖ²¥´«Ã½.

]]>

The ÀÖ²¥´«Ã½-backed Autoworks Motorsport team uses SR-21 sintered brake pads on their BMW M4 GT4

In 2023, the ÀÖ²¥´«Ã½ Frenos (Spain)-supported Autoworks Motorsport race team clinched gold in the TC class of both the Iberian Supercars Endurance Series and Portuguese Speed Championships, following a thrilling year of racing. Throughout this season, their BMW M240i race car was equipped with ÀÖ²¥´«Ã½ Racing’s RP-Xâ„¢ track motorsport brake pads.

For 2024, the outfit has upgraded to a BMW M4 GT4 race car, to put them in the GT4 category of the Supercars Endurance Series. In this car, they are running ÀÖ²¥´«Ã½ Racing’s new SR-21â„¢ sintered endurance race pads, to help handle the extra capabilities of their new car.

Following a strong start where two podiums were achieved, the roadshow most recently took the Autoworks Motorsport team over to Spain’s Circuito del Jarama, where some fantastic driving saw class wins and overall podiums secured.

Read how it all panned out in the team’s words below…

“Autoworks Motorsport team achieved two podiums in the GT4 Bronze category and an overall third position in the Supercars Endurance, which took place this weekend at Circuito del Jarama.

“Supercars Endurance, south European championship, continued its season in Spain after the inaugural event at the �ngel Nieto de Jerez circuit. This time around, it was held alongside the Jarama Classic event, whose popularity is recognised by the fans and the large number of people who came to the circuit throughout the weekend.

“Friday was entirely dedicated to free practice, while Saturday was all about official practice, with both Borja and Héctor finishing second on the grid in their BMW M4 GT4, with which they have barely done any pre-season testing.

“In the first race on Sunday, Borja started from sixth position and made a steady progression up to fourth

place, but after the pit stop Hector was unable to maintain his position due to tyre degradation from the high track temperatures that dominated Sunday’s race. However, the team’s efforts paid off, with a second place in class and valuable points for the championship.

“The second race was highlighted by a good start and first stint by Héctor, who left the car well positioned so that, after the stop, Borja took advantage of a safety car to recover the car and attack with all his strength to finish with the victory in his category and third in the overall classification.”

“’We are very happy! To get a victory and a second place in GT4 Bronze, as well as a third place overall after achieving the best comeback of the weekend is something we are very proud to do at our home track in front of our sponsors, family and friends. This result is the fruit of five years of hard work and we are very happy and excited’, commented Héctor and Borja.

“The Iberian Supercars Endurance action will continue on 13-14 July in Portugal at the legendary Estoril circuit, which will once again share the stage with classic car competitions under the banner of the Estoril Summer Festival.�

Connect with Autoworks Motorsport for more news and information:

SRâ„¢ Sintered Endurance Race Pads

A world-first true endurance pad, delivering better braking and lasting longer than just about any of its rivals. Available in SR-11â„¢ and SR-21â„¢ blends.

View Product

The post SRâ„¢-Equipped Supercars Endurance Series Team Secure More Podiums as 2024 Campaign Begins appeared first on ÀÖ²¥´«Ã½.

]]>
ÀÖ²¥´«Ã½ 1-2 at Donington Trackday Championship Round /race-motorsport-articles-cars/ebc-1-2-at-donington-trackday-championship-round/ Tue, 21 May 2024 12:44:54 +0000 /?p=38422 The post ÀÖ²¥´«Ã½ 1-2 at Donington Trackday Championship Round appeared first on ÀÖ²¥´«Ã½.

]]>

A duo of ÀÖ²¥´«Ã½-equipped Honda Civics secured top places at the Derbyshire leg of the series

It was a strong start to the year for two ÀÖ²¥´«Ã½-equipped Honda Civic Type R teams that are competing in the 2024 MSVT Trackday Championship.

Justin Roberts and Nicole Drought boast an ÀÖ²¥´«Ã½ Racing Apollo Big Brake Kit and SR-11â„¢ sintered endurance pads on their red machine whilst the Semipri Racing team with the blue hatchback rely on ÀÖ²¥´«Ã½ Racing’s SR-11â„¢ pads (front axle) and ÀÖ²¥´«Ã½â€™ Bluestuff B pads (rear axle).

The below report is from the perspective of the Semprini Racing outfit. To read a report from the same race from the perspective of the other team, please click here.

“The first round of the MSVT Trackday Championship at Donington Park resulted in an ÀÖ²¥´«Ã½ Racing 1-2, with Honda Civics from Motion Motorsport and Semprini Racing filling the top two places on the podium.

“The red Motion Motorsport car of Justin Roberts and Nicole Drought qualified on the second row, with the blue Semprini Racing machine of Jeremy Evans and Phil Hart on the 4thÌý°ù´Ç·É.

“At the start it was Evans in the Semprini car who got the jump and passed Drought into the first corner, tucking in behind a couple of BMWs, a couple of Porsches and a newer FN2 Civic of Paul McHugh.

“For the next six laps, Drought and Evans were nose-to-tail in an epic battle until Evans momentarily hesitated into Redgate as a backmarker appeared on the scene. That was all Drought needed and she slipped through to take the place.

“A couple of laps later, a safety car because of a Fiesta in the gravel at the final chicane saw the Motion Civic pit to hand over to Justin Roberts while Evans stayed out in the Semprini car.

“As the safety car period ran, the pits were a very busy place to be with the Semprini team electing to leave Jeremy out in clear air, taking the lead but still needing to make the mandatory two-minute stop.

“It wasn’t long before a different Fiesta also found the gravel in the same spot with the Semprini Team reacting quickly and opting for their pit stop in anticipation of another safety car – which duly came. A quieter pit lane meant an easier stop and Phil Hart left the pits in P2 having leapfrogged the Roberts car.

“Justin was on a charge and hunted down and passed the Semprini Civic – with the leading BMW suffering an engine failure, and other cars falling foul of pitlane penalties the final laps unfolded with the Motion Motorsport car of Roberts and Drought taking the win followed home by the Semprini Racing Civic of Evans and Hart in second place.�

Connect with Semprini Racing for more news and information:

SR-11â„¢ Race and Endurance Pads

A medium-friction endurance motorsport compound that’s targeted for front of street base cars where high ABS effect exists on the car or for the front and rear of race cars with bias controls.

Bluestuff B Street/Motorsport Pads

Reformulated for faster bedding and reduced early life fade –our recommended entry-level race pad. Medium-plus lifetime and the choice for several seasons in BMW Cup racing.

View Product

The post ÀÖ²¥´«Ã½ 1-2 at Donington Trackday Championship Round appeared first on ÀÖ²¥´«Ã½.

]]>
Track Day Corvette Owner Improves Stopping Power with ÀÖ²¥´«Ã½ SR-11â„¢ Pad Upgrade /race-motorsport-articles-cars/track-day-corvette-owner-improves-stopping-power-with-ebc-sr-11-pad-upgrade/ Mon, 13 May 2024 12:56:07 +0000 /?p=38335 The post Track Day Corvette Owner Improves Stopping Power with ÀÖ²¥´«Ã½ SR-11â„¢ Pad Upgrade appeared first on ÀÖ²¥´«Ã½.

]]>

Jesse headed back to Thunderhill Raceway Park with his C5 Corvette

US-based track day enthusiast, Jesse, has been striving to optimise his 1999 C5 Chevrolet Corvette for some time now, applying an extensive list of modifications to the car in the aim of improving lap times.

He recently headed back to one of the venues he frequents regularly – Thunderhill Raceway Park in California – with ÀÖ²¥´«Ã½ Racing’s SR-11â„¢ sintered brake pads installed in his sports car.

You can read how these uprated brake pads performed in his own words below. This is an extract from a more detailed blog post which can be .

“Going into this track day, I was mostly looking to confirm that my DIY chassis-mounted wing yields an improvement in handling that will hopefully equate to better lap times than the last time I was at the track. The track weekend though was also a present to myself, as it took place the day after my 40th birthday! That said… a few small tasks turned into a bunch of stuff… so much for keeping it simple and just sending it! Overall though, it was a success and I had really positive results from my modifications.â€�

Modifications, Maintenance & Thoughts Before the Track Day

“Everything seemed to hold up pretty good from the last track day, so there weren’t any critically outstanding issues. There’s a few standard items and then one stretch goal I may or may not get around to.â€�

Swapped Out Spring Rates

“So, as part of upgrading aero on my car and discussing the handling with a variety of other folks out there, it became apparent I was running too low of a spring rate. I spoke with the folks over at  again and they were able to order up some Eibach springs for me in the right size and in spring rates of 700 front, 750 rear. This should upgrade handling overall and help me keep a car with balanced handling to a potential hair of oversteer. We’ll see how I like the car driving with these new spring rates and I’ll report back on it all.â€�

Testing Out ÀÖ²¥´«Ã½ SR-11â„¢ Brake pads

“While the Carbotech XP-10 brake pads treated me quite good at the track, lasting nine track days and providing excellent braking characteristics, the new ÀÖ²¥´«Ã½ SR-11â„¢ brake pads are currently all the rage for performance AND durability. So, I grabbed a pair to test out. Per ÀÖ²¥´«Ã½ recommendations, I scuffed up the current rotors significantly to help remove material from the old pads and to help the new pads bed in quicker. We’ll see how these hold up!â€�

Added DIY Splitter Ramps to the 9LR Splitter & Confirmed Hardware

“So, you can read all about the  over in my , but the short version is after researching various splitter ramp options ranging from $150-200… I decided to just make my own. We’ll see if they hold up at the track. The good news is they’re fairly reasonable to remove, but I’m fairly confident they should be able to do the trick. This should yield a modest bump in downforce on the front of the car, which may help with that bit of understeer I’ve been dealing with. It’s also worth mentioning I took the entire thing off to begin with as it felt a bit loose, but sure enough, it’s all as secure as can be!â€�

MPI Wheel Bearing Concerns

“I had play going into the previous track day, but decided to risk it. The play didn’t change at all it would seem, but it is enough when moving the wheel there’s a bit of a ‘clunk’. I measured the distance out to be .026″ with a feeler gauge, so that may not be enough to worry about. I let the folks at MPI know I was having this issue and we’re still in communication about it. They understandably can’t see it themselves, so I took the measurement above and sent them a video of the clunking. They got back to me and are sending me two new front wheel bearings and will be taking these two back to take a look at. Hopefully the issue was just a fluke, and if not even more hopeful that they will continue to refine the product to be more robust.â€�

Improved Airflow Throughout the Car

“So, what started as plan for a few small airflow improvements turned into a whole bunch of small modifications that were quickly adding up to a tonne of notes. I decided to write about all of my  in its own article. The short version though is I focused on improving airflow to and through the radiator, along with diverting a little bit extra fresh air up to the cold air intake air filters.�

Tires Swapped Out

“So, back on  I picked up a nail through one of my tires that couldn’t really be properly fixed. I got a whole new set of four tires, chucked the one bad tire, and kept the other three around just in case. Well, turns out I needed them as my rear tires were positively roasted after my last track day. They perhaps had one, maybe two track days left in them… but given I had a set of tires around with 2-3 days left in them I figured I’d swap those two in and keep the other two around as spares just in case.â€�

How The Track Day Actually Went

“With all of the last few details buttoned up and a track full of tonnes of gear, we made the eight-hour drive down to Thunderhill. We stayed in the nearby town of Willows, CA, which has a nice little Airbnb/hotel that is decent enough to stay at.

“Saturday was about the usual scene for a winter track day. Colder temperatures were present along with a constant breeze. Still though, not too bad overall. This particular group was a Shelby club, so it was loaded with a wide variety of mustangs. It was interesting to see how my 25-year-old Corvette stacked up against far newer cars. I’m glad to report back that it held up well, catching all the other Mustangs even with lots of aero in all of the turns. Unfortunately, the straights were the issue. More on that to be written on the post-event write-up.

“One bummer for me going into the track day is that we were running the ‘Cyclone’, which was a bummer simply because I wanted to compare my times this weekend to the previous time here without the wing on the car.

“The refined aero and stiffer springs felt great and were far more confidence inspiring entering high speed turns. In mid-speed turns, the wing still helped a bunch, which combined with my willingness to rotate a car at 80mph being greater than 112mph balanced itself out nicely.

“One big standout was the ÀÖ²¥´«Ã½ SR-11â„¢ brake pads. They had way better initial bite and feel than the Carbotech XP-10s and held up to heat way better throughout the course of a day. It’s not entirely fair to compare these brake pads as the XP-10s are streetable, and in my opinion the SR-11s are not. Still though, what an improvement in being able to brake far better than ever! With that initial strong bite, I could also heel-toe/side-foot far easier. Overall, a big improvement to the car! I’ll be curious to see how they hold up!

“Engine temperatures were excellent as the DIY cooling mods clearly worked! I never exceeded 243 degrees Fahrenheit all day when previously even with colder weather I’d push well into the high 250s. I also only pushed above 240 after many back-to-back all out laps, where as normal lapping, especially in traffic, stayed at 237. So, I’m pretty confident the engine cooling modifications must all be working, though since I did them all at once I can’t really point to any specific one as being superior to the other.

“On Saturday I put down a best time of 2:06.310. I felt pretty good about that, but knew I was leaving time on the table in a few places. It’s one of those things were small hesitations here or there can cost a good chunk of time. Brake just a few MPH more than necessary from 120 down, give up a tenth of a second. Don’t launch it into turn 3? There goes some time. Overly square up the Cyclone hill? Throw away another tenth.

“Sunday afternoon I really picked up some time on my laps though. I was chasing a far higher horsepower Mustang than mine and gaining on them every lap despite their near 33% higher power. Then, in a subsequent session I put down two back-to-back 2:05 laps, with my best being 2:05.036 per timing the lap from video. 10hz GPS Bluetooth Track Addicts has it at 2:05.307, so right around that time. I’m stoked though as I was able to drop a full second from Saturday. What was interesting was comparing daytime temperatures, wind, and when in my sessions my time dropped. Since Sunday was just a bit hotter and less windy in the AM, track temperatures were up a bit as were car temperatures. I saw a peak oil temperature of 243 degrees, which was a sure-fire indicator I was pushing faster lap times… but I also was starting to slide the car more as the tires got hot. Now normally, I’m told sliding is slow… but for me being able to rotate the car into a lot of the turns definitely helped me pick up time. While in some places it surely lost time as I’d understeer and push a bit wider than intended and have to saw the steering wheel to regain traction, but in other places I could pitch the car sideways a bit early while braking so when I entered the turn I’d already have the car rotated a bit. Not only was that fun, but apparently it was fast!

“Other minor observation from out there at the track day was that leaving turn 11 I was always faster if I stayed in 3rd versus 2nd. While I had way more acceleration out of the turn in 2nd, it was really easy to accidentally step the rear out more than intended, and the time lost making the shift was notable. Every single time I stayed in 3rd and pulled through that section I’d be shifting to 4th right at the exit cone for turn 13. If I grabbed second, I’d always be shifting to 4th afterwards.

“Another place I’d carry a lot more speed was going into turn 1 and just staying in 4th. If I downshifted to 3rd I’d have more drive into turn 2, but I had plenty of drive in 4th and the addition of a shift into that braking zone unsettled the car just that little bit extra and resulted in me shedding extra speed.

“To get a lot of faster I think I need to get better at looking at session data and being able to compare lap times when trying different lines or gear selections. For example I tried two variations of the Cyclone, and in those variations were also gear variation. I settled on a line a friend showed me and staying in 3rd gear as I’d hit turn 6 just as quick… but perhaps that was just a matter of perception, as a tenth of a second isn’t much of a difference at all!â€�

Summary

“In a strange turn of events, my back straight speed was up 4mph on average. I feel confident saying it wasn’t because of my superior line choice either as I’d often be a bit off-line as I’d overcook that last turn. Perhaps it’s the extra aero hold through turns 10-13 meaning I hit the straight with a higher top speed? OR… perhaps it’s because I stopped grabbing 2nd and just went with third. Yeah… it’s probably that.

“I can’t really ascertain massive gains here, and this is just looking at a single metric which is peak speed, not peak speed over time which equates to lap times. Some gains can also clearly be related to a change in technique (pulling 3rd vs going to 2nd when going through turn 12). Overall. I can’t say for certain the wing put me way ahead of the previous times, but overall it seems based on a few sample areas I was in general traveling faster with the new aero and brakes… so there’s a probable correlation.â€�

SR-11â„¢ Race and Endurance Pads

The latest sintered race material from ÀÖ²¥´«Ã½ will launch in spring 2022 and promises to eclipse most of today’s organic, semi-metallic, and carbon-based racing brake pads.

SR-21â„¢ Race and Endurance Pads

A variation of SR-11â„¢ that offers ultra-high friction and is targeted for the front and rear of race cars with bias controls only. SRâ„¢ bites harder and lasts longer.

The post Track Day Corvette Owner Improves Stopping Power with ÀÖ²¥´«Ã½ SR-11â„¢ Pad Upgrade appeared first on ÀÖ²¥´«Ã½.

]]>